Test Jigs / Machine Emulation - |
The C5 Controller Concept - Product Development and Testing- Its Robust - you can mount the C5 controller(s) and your system controller on a board, and you can take it to site
- Its Simple - this point stands on its own
- Its how you left it - some other sod hasn't nicked one of the A-D cards or cables, or changed the test software suite environment
- Inherent Testing - the development jig can be used for initial batch production testing while you work on the production test software
- Cheap to duplicate - ideal test system to sell to emd users of machines
- Do your own add on Card - We don't have to start from scratch, just tell us what is missing and we will add it to the card list
- No extra massaging circuits - The output of the card is what you need, connect direct to your system.
|  |
C511 PCB - 9S08AW32 Processor PCB- RS485 Port
- 12V supply
- 6 x 3A SPST relays
- Programming port (with IIC and SCI connections)
- DIP switch
- 4 Diagnostic LEDs
- 1 Dual Colour Led
- Molex Mini Jr Connections
- Freescale 8bit 9S08AW32 processor
- 26PIN IDC expansion port
|  |
C521 PCB - Isolated Variable ResistorDeveloped to emulate PT100 and Thermister Temperature Sensors.- 2 chains of 7 series resistances
- Reed Relays used to short resistances in the chain
- It is possible to connect into the one chain
|  |
C522 PCB - Isolated 4-20mA SourcesDeveloped to emulate 4-20mA Sensors (3 wire type, +V, 0V, Sig).
|  |
C523 PCB - Analog InputsDeveloped to interface analog signals onto the analog lines on the 26IDC.
- 8 Analog inputs
- VDD, VCC and 0V available on the connector
- OPAMP buffers
- Can be setup for 4-20mA inputs at load time
- Gain of OPAMPs can be setup at load time
|  |
